Attached is the portion of the .cfg file where I am experiencing the problem.
### Interface 3 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
#
#Target[172.18.1.20_Nu0]: #Nu0:public@172.18.1.20:
#SetEnv[172.18.1.20_Nu0]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"
#MaxBytes[172.18.1.20_Nu0]: 536870911
#Title[172.18.1.20_Nu0]: #Nu0 -- 2650main
#PageTop[172.18.1.20_Nu0]: <H1>#Nu0 -- 2650main</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>2650main </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>Null0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD>Nu0</TD></TR>
# <TR><TD>Max Speed:</TD> <TD>4295.0 Mbits/s</TD></TR>
# </TABLE>
### Interface 4 >> Descr: 'T1-0/1' | Name: 'T1 0/1' | Ip: '172.19.2.24' | Eth: '' ###
### The following interface is commented out because:
### * it is a DS1 controllers
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.1)
### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161)
### community: "public"
### request ID: -293281444
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to query
#
Target[172.18.1.20_T1_0_1]: #T1\ 0/1:public@172.18.1.20:
SetEnv[172.18.1.20_T1_0_1]: MRTG_INT_IP="" MRTG_INT_DESCR="T1-0/1"
MaxBytes[172.18.1.20_T1_0_1]: 193000
Title[172.18.1.20_T1_0_1]: #T1 0/1 -- 2650main
PageTop[172.18.1.20_T1_0_1]: <H1>#T1 0/1 -- 2650main</H1>
<TABLE>
<TR><TD>System:</TD> <TD>2650main </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>T1-0/1 </TD></TR>
<TR><TD>ifType:</TD> <TD>ds1 (18)</TD></TR>
<TR><TD>ifName:</TD> <TD>T1 0/1</TD></TR>
<TR><TD>Max Speed:</TD> <TD>1544.0 kbits/s</TD></TR>
</TABLE>
### Interface 5 >> Descr: 'T1-0/2' | Name: 'T1 0/2' | Ip: '172.21.2.24' | Eth: '' ###
### The following interface is commented out because:
### * it is a DS1 controllers
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.1)
### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161)
### community: "public"
### request ID: -293281443
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to query
#
Target[172.18.1.20_T1_0_2]: #T1\ 0/2:public@172.18.1.20:
SetEnv[172.18.1.20_T1_0_2]: MRTG_INT_IP="" MRTG_INT_DESCR="T1-0/2"
MaxBytes[172.18.1.20_T1_0_2]: 193000
Title[172.18.1.20_T1_0_2]: #T1 0/2 -- 2650main
PageTop[172.18.1.20_T1_0_2]: <H1>#T1 0/2 -- 2650main</H1>
<TABLE>
<TR><TD>System:</TD> <TD>2650main </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>T1-0/2 </TD></TR>
<TR><TD>ifType:</TD> <TD>ds1 (18)</TD></TR>
<TR><TD>ifName:</TD> <TD>T1 0/2</TD></TR>
<TR><TD>Max Speed:</TD> <TD>1544.0 kbits/s</TD></TR>
</TABLE>
### Interface 6 >> Descr: 'Serial0/1:0' | Name: 'Se0/1:0' | Ip: '172.19.2.24' | Eth: '' ###
Target[172.18.1.20_Se0_1_0]: #Se0/1\\:0:public@172.18.1.20:
SetEnv[172.18.1.20_Se0_1_0]: MRTG_INT_IP="172.19.2.24" MRTG_INT_DESCR="Serial0/1:0"
MaxBytes[172.18.1.20_Se0_1_0]: 192000
Title[172.18.1.20_Se0_1_0]: #Se0/1:0 -- 2650main
PageTop[172.18.1.20_Se0_1_0]: <H1>#Se0/1:0 -- 2650main</H1>
<TABLE>
<TR><TD>System:</TD> <TD>2650main </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Serial0/1:0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
<TR><TD>ifName:</TD> <TD>Se0/1:0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>1536.0 kbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>172.19.2.24 ()</TD></TR>
</TABLE>
### Interface 7 >> Descr: 'Serial0/2:0' | Name: 'Se0/2:0' | Ip: '172.21.2.24' | Eth: '' ###
Target[172.18.1.20_Se0_2_0]: #Se0/2\\:0:public@172.18.1.20:
SetEnv[172.18.1.20_Se0_2_0]: MRTG_INT_IP="172.21.2.24" MRTG_INT_DESCR="Serial0/2:0"
MaxBytes[172.18.1.20_Se0_2_0]: 192000
Title[172.18.1.20_Se0_2_0]: #Se0/2:0 -- 2650main
PageTop[172.18.1.20_Se0_2_0]: <H1>#Se0/2:0 -- 2650main</H1>
<TABLE>
<TR><TD>System:</TD> <TD>2650main </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Serial0/2:0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
<TR><TD>ifName:</TD> <TD>Se0/2:0</TD></TR>
<TR><TD>Max Speed:</TD> <TD>1536.0 kbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>172.21.2.24 ()</TD></TR>
</TABLE>
When I un-comment these interfaces, the graphs are created, but the data is not updated.Statistics: Posted by mrrlg — Sat Sep 11, 2004 5:18 am
]]>