Separating the inbound and outbound traffic might not be possible, since I'm not sure that information is available via the API. IIRC there was in/out packet counts but not bytes. However I'll check when I'm back at work.
Collecting payment may be dependent on your gender, attractiveness, geographical location, and permission from my wife
Statistics: Posted by stevesh — Wed Jan 05, 2011 1:58 pm
]]>
well done!!
I promise you a kiss if you are able to separate the inbound / outbound traffic
thx
Statistics: Posted by Titeuf74 — Tue Dec 28, 2010 9:33 pm
]]>
this is the most beautifull Xmas gift i ever had...
many thanks, i will test it when i'll be right back at the office..
Statistics: Posted by Titeuf74 — Sun Dec 26, 2010 6:09 am
]]>
Statistics: Posted by stevesh — Wed Dec 22, 2010 11:07 am
]]>
]]>
]]>
Seems that the part of the code which processes the NET report is completely missing!
Somewhere along the line an older version must have been replaced and that piece of code has been lost 
So, I'm rewriting the netreport() function now from scratch as I cant find a backup of this part. Everything else is there, though...
Statistics: Posted by stevesh — Tue Dec 21, 2010 9:55 am
]]>
as mentionned earlier, i send you a reminder
Statistics: Posted by Titeuf74 — Mon Dec 20, 2010 11:53 pm
]]>
]]>
it seems i'm not the only one facing this issue.
see u sooon
Statistics: Posted by Titeuf74 — Thu Dec 09, 2010 7:47 am
]]>
I'm not actually using the net stats here in our live system, so I'll need to do some investigation (when I get the free time...)
I'll get back on this one, feel free to send me a reminder if you dont hear anything in the next week
Statistics: Posted by stevesh — Wed Dec 08, 2010 10:12 am
]]>
so i set level3 stats at 5 min. And replace guest name by the IP adress and the result remains the same.
./check_vmware.pl --config=vmconfig.cfg --mode=nagios --report=net --guest=xx.xxx.xx.xxx --debug
Starting.
Connecting
Connected
Server Time : 2010-12-07T07:39:25.783149Z
Trying to locate 10.117.65.221
Now trying as hostname...
Now trying as IP address...
Guest is poweredOn
Report type requested is [net]
Base is Datacenters
Disconnecting...
Exiting with status (3)
here is the command but i query the CPU:
./check_vmware.pl --config=vmconfig.cfg --mode=nagios --report=CPU --guest=xx.xxx.xx.xxx --debug
Starting.
Connecting
Connected
Server Time : 2010-12-07T07:39:39.595826Z
Trying to locate xx.xxx.xx.xxx
Now trying as hostname...
Now trying as IP address...
Guest is poweredOn
Report type requested is [CPU]
Base is Datacenters
Retrieving PerfMgr data
Selected interval is: 300
Processing entities:
Server
Creating query for Server
Start time: 2010-12-07T07:34:00Z
End time : 2010-12-07T07:39:00Z
Retrieving data...
Perfstats retrieved...
Results for Server
Perfdata object: 2010-12-07T07:40:00Z
Disconnecting...
Exiting with status (0)
CPU usage at 39.53%<BR> Guest CPUs: 1<BR> CPU stats: Used/System/Ready = 39.11%/0.64%/0.01%|cpu=39.53%;80;90;0;100 ready=0.01%;5;10;0;100 user=39.11%;;;0;100 sys=0.64%;;;0;100
VMWARE vCenter Server Version 4.0.0 Build 208111
I do not understand the difference....
Statistics: Posted by Titeuf74 — Tue Dec 07, 2010 8:46 pm
]]>
Either you don't have a guest called 'SERVER', or else you have not enabled the statistics to the required level in the virtualcentre. You have shown that you have level2 stats at 5min, so this should be enough (but try with level3 just incase something is odd, the API keeps changing...)
My guess is that 'SERVER' has not managed to identify your guest correctly. Try using the hostname or IP address.
Statistics: Posted by stevesh — Tue Dec 07, 2010 10:00 am
]]>
./check_vmware.pl --config=vmconfig.cfg --mode=nagios --guest=SERVER --report=net --debug
result is:
Starting.
Connecting
Connected
Server Time : 2010-12-06T15:32:57.18974Z
Trying to locate SERVER
Report type requested is [net]
Base is Datacenters
Disconnecting...
Exiting with status (3)
I would like to monitor the network interface of a virtualmachine. But nothing is comming back to my screen.
I 'm running vsphere 4.0 with esx 4 hosts. My vcenter Server Settings statistics are:
5min>1Day>2
30min>1week>2
2Hrs>1month>1
1Day>1Year>1
--report=cpu AND --report=mem are running well
?m running the last version of check_vmware.pl
./check_vmware.pl --version
vSphere SDK for Perl version: 4.1
Script 'check_vmware.pl' version: 1.0
Perl sdk for vsphere is installed
I don't know what i'm running false, so if you can help .....
thx
C
Statistics: Posted by Titeuf74 — Tue Dec 07, 2010 4:39 am
]]>