Cheshire Cat Computing

Good day,
Please can you still help me further?

I want to use mrtg for analyzing squid-cache logs and other internet traffic.

Meanwhile i have configured this in squid:
acl snmppublic snmp_community public
snmp_port 3401
snmp_access allow snmppublic all

My OS is Windows 7 Ultimate and these services are already running:
SNMP Service Started Automatic Local System
SNMP Trap Started Automatic (Delayed Start) Local Service

In "NMPv1_Session (remote host: "localhost" [127.0.0.1].161)" does the 161
the represent SNMP port, if so, how can i change it to 3401?

See below my efforts and the errors.

What else can i do to reslove the error?
Regards,
Yomi.


> Squid,
>
> it is mrtg-request@lists.oetiker.ch
>
> listname is a placeholder!
>
> zou error means that your device (localhost) is not responding the
> snmp queries ... you have to enable snmp support
>
> cheers
> tobi
>
>
> Yesterday squid@sourcesystemsonline.com wrote:
>
>> Good day,
>> I have sent Subscribe to listname-request@lists.oetiker.ch twice no
>> reply,
>> why?
>> However, i was trying to make mrtg.cfg for squid activities under
>> windows
>> 7 OS, see below my efforts and the errors.
>>
>> What can i do to correct this error?
>>
>> "SNMP Error:
>> no response received
>> SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
>> community: "public"
>> request ID: 1422315325
>> PDU bufsize: 8000 bytes
>> timeout: 2s
>> retries: 5
>> backoff: 1)
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 629
>> SNMPWALK Problem for 1.3.6.1.2.1.1 on public@localhost::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@localhost: as no info could be retrieved"
>>
>> Regards,
>> Yomi
>>
>> My Efforts using different options:
>>
>> Microsoft Windows [Version 6.1.7600]
>> Copyright (c) 2009 Microsoft Corporation. All rights reserved.
>>
>> c:\mrtg-2.17.0>cd bin
>>
>> c:\mrtg-2.17.0\bin>perl mrtg
>> 'perl' is not recognized as an internal or external command,
>> operable program or batch file.
>>
>> c:\mrtg-2.17.0\bin>dir perl
>> Volume in drive C has no label.
>> Volume Serial Number is 000A-EAAD
>>
>> Directory of c:\mrtg-2.17.0\bin
>>
>> File Not Found
>>
>> c:\mrtg-2.17.0\bin>dir/w/p
>> Volume in drive C has no label.
>> Volume Serial Number is 000A-EAAD
>>
>> Directory of c:\mrtg-2.17.0\bin
>>
>> [.] [..] cfgmaker indexmaker
>> mrtg mrtg-traffic-sum rateup.exe rateup.nlm
>> 6 File(s) 630,349 bytes
>> 2 Dir(s) 124,958,629,888 bytes free
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl mrtg
>> Usage: mrtg <config-file>
>>
>> mrtg-2.17.0 - Multi Router Traffic Grapher
>>
>> Copyright 1995-2006 by Tobias Oetiker
>> Licensed under the Gnu GPL.
>>
>> If you want to know more about this tool, you might want
>> to read the docs. You can find everything on the
>> mrtg website:
>>
>> http://oss.oetiker.ch/mrtg/
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public --global "WorkDir:
>> c:\mrtg-2
>> .17.0" --output mrtg.cfg
>> Error:
>> can't resolve "public" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@public::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@public: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@snmppublic --global
>> "WorkDir
>> : c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "snmppublic" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@snmppublic::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@snmppublic: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@localhost --global
>> "WorkDir:
>> c:\mrtg-2.17.0" --output mrtg.cfg
>> SNMP Error:
>> no response received
>> SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
>> community: "public"
>> request ID: -921942783
>> PDU bufsize: 8000 bytes
>> timeout: 2s
>> retries: 5
>> backoff: 1)
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 629
>> SNMPWALK Problem for 1.3.6.1.2.1.1 on public@localhost::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@localhost: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@localhost:3401
>> --global "Wor
>> kDir: c:\mrtg-2.17.0" --output mrtg.cfg
>> WARNING: Skipping public@localhost:3401 as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@localhost.3401
>> --global "Wor
>> kDir: c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "localhost.3401" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@localhost.3401::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@localhost.3401: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@[127.0.01].3401
>> --global "Wo
>> rkDir: c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "[127.0.01].3401" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@[127.0.01].3401::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@[127.0.01].3401: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@127.0.01.3401
>> --global
>> "Work
>> Dir: c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "127.0.01.3401" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@127.0.01.3401::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@127.0.01.3401: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@[127.0.0.1].3401
>> --global "W
>> orkDir: c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "[127.0.0.1].3401" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@[127.0.0.1].3401::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@[127.0.0.1].3401: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@127.0.0.1.3401
>> --global "Wor
>> kDir: c:\mrtg-2.17.0" --output mrtg.cfg
>> Error:
>> can't resolve "127.0.0.1.3401" to IP address
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 428
>> SNMPWALK Problem for public@127.0.0.1.3401::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@127.0.0.1.3401: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@127.0.0.1 --global
>> "WorkDir:
>> c:\mrtg-2.17.0" --output mrtg.cfg
>> SNMP Error:
>> no response received
>> SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
>> community: "public"
>> request ID: -2082819803
>> PDU bufsize: 8000 bytes
>> timeout: 2s
>> retries: 5
>> backoff: 1)
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 629
>> SNMPWALK Problem for 1.3.6.1.2.1.1 on public@127.0.0.1::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@127.0.0.1: as no info could be retrieved
>>
>>
>> c:\mrtg-2.17.0\bin>c:\perl\bin\perl cfgmaker public@localhost --global
>> "WorkDir:
>> c:\mrtg-2.17.0" --output mrtg.cfg
>> SNMP Error:
>> no response received
>> SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
>> community: "public"
>> request ID: 1422315325
>> PDU bufsize: 8000 bytes
>> timeout: 2s
>> retries: 5
>> backoff: 1)
>> at C:/mrtg-2.17.0/bin\..\lib\mrtg2/SNMP_util.pm line 629
>> SNMPWALK Problem for 1.3.6.1.2.1.1 on public@localhost::::::v4only
>> at cfgmaker line 955
>> WARNING: Skipping public@localhost: as no info could be retrieved