| Cheshire Cat Computing http://www.steveshipway.org/forum/ |
|
| RRD Error: bad format for [G]PRINT i http://www.steveshipway.org/forum/viewtopic.php?f=2&t=126 |
Page 1 of 1 |
| Author: | fadighy [ Tue Feb 10, 2004 4:51 am ] |
| Post subject: | RRD Error: bad format for [G]PRINT i |
After installing the Bundle, I get the following error in the summery under the RAM Used section. and there is no graph.... every thing els is working fine... I hade the same issue on more than one machine, even with a fresh install. W2k and W2003. the error: RRD Error: bad format for [G]PRINT in '% Used: Max %6.2lf %sPercent, ' You can visit the configuration verification page here. RRD: c:\mrtg/wwwroot\wide-isa1_memory.rrd Device: [wide-isa1.cfg] Interface: wide-isa1_memory Interfaces: wide-isa1_213.210.245.199,wide-isa1_memory,CPU_1,_incoming,storageUsed-ISA-C,_outgoing,wide-isa1_192.168.0.2 Params: c:\mrtg\wwwroot\graphs\wide-isa1.cfg-wide-isa1_memory-ds-l2.png --imgformat PNG --base 1024 --lazy -l 0 --interlaced -u 1 -w 205 -h 100 -s end-1000m --x-grid HOUR:1:HOUR:24:HOUR:2:0:%H --title RAM Used --vertical-label % RAM Used DEF:in=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds0:AVERAGE DEF:out=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds1:AVERAGE DEF:min=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds0:MAX DEF:mout=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds1:MAX AREA:in#00cc00 CDEF:down=in,UN,INF,0,IF AREA:down#d0d0d0 HRULE:100#ff0000 PRINT:min:MAX:% Used\: Max %6.2lf %sPercent, PRINT:in:AVERAGE:Avg %6.2lf %sPercent, PRINT:in:LAST:Last %6.2lf %sPercent COMMENT:2/9/2004 6:44:00 PM\r Target: wide-isa1_memory |
|
| Author: | fadighy [ Tue Feb 10, 2004 4:58 am ] |
| Post subject: | |
I forgot to add that when I click on the RAM Used link I get the Graph and it is working fine, only in the summery section it is not working. |
|
| Author: | fadighy [ Tue Feb 10, 2004 10:49 am ] |
| Post subject: | |
I found the bug report, adding double %% in the legend solved the error, every thing is working fine. |
|
| Author: | stevesh [ Wed Feb 11, 2004 5:13 pm ] |
| Post subject: | |
Can you please confirm which version of routers.cgi you are using? Steve |
|
| Author: | fadighy [ Wed Feb 11, 2004 7:30 pm ] |
| Post subject: | |
routers.cgi Version v2.11 |
|
| Author: | stevesh [ Thu Feb 12, 2004 9:11 am ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 12 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|