Cheshire Cat Computing

After installing the Bundle, I get the following error in the summery under the RAM Used section. and there is no graph....

every thing els is working fine...

I hade the same issue on more than one machine, even with a fresh install. W2k and W2003.

the error:

RRD Error: bad format for [G]PRINT in '% Used: Max %6.2lf %sPercent, '

You can visit the configuration verification page here.

RRD: c:\mrtg/wwwroot\wide-isa1_memory.rrd
Device: [wide-isa1.cfg]
Interface: wide-isa1_memory
Interfaces: wide-isa1_213.210.245.199,wide-isa1_memory,CPU_1,_incoming,storageUsed-ISA-C,_outgoing,wide-isa1_192.168.0.2

Params: c:\mrtg\wwwroot\graphs\wide-isa1.cfg-wide-isa1_memory-ds-l2.png --imgformat PNG --base 1024 --lazy -l 0 --interlaced -u 1 -w 205 -h 100 -s end-1000m --x-grid HOUR:1:HOUR:24:HOUR:2:0:%H --title RAM Used --vertical-label % RAM Used DEF:in=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds0:AVERAGE DEF:out=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds1:AVERAGE DEF:min=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds0:MAX DEF:mout=c\:\mrtg/wwwroot\wide-isa1_memory.rrd:ds1:MAX AREA:in#00cc00 CDEF:down=in,UN,INF,0,IF AREA:down#d0d0d0 HRULE:100#ff0000 PRINT:min:MAX:% Used\: Max %6.2lf %sPercent, PRINT:in:AVERAGE:Avg %6.2lf %sPercent, PRINT:in:LAST:Last %6.2lf %sPercent
COMMENT:2/9/2004 6:44:00 PM\r

Target: wide-isa1_memory

_________________
Reagrds
Fadi Abu Ghayadh

I forgot to add that when I click on the RAM Used link I get the Graph and it is working fine, only in the summery section it is not working.

_________________
Reagrds
Fadi Abu Ghayadh

I found the bug report, adding double %% in the legend solved the error, every thing is working fine.

_________________
Reagrds
Fadi Abu Ghayadh

Can you please confirm which version of routers.cgi you are using?

Steve

routers.cgi Version v2.11

_________________
Reagrds
Fadi Abu Ghayadh