Cheshire Cat Computing

I have installed routers2.cgi , but Its showing incorrect values in some of graphs.

For example 'Mikrotik Active users' graphs showing via 14all.cgi are OKAY.
But same graphs showing via routers2.cgi are INCORRECT.

Only interfaces Graphs are showing correctly,
All other graphs like Squid cache hit ratio, and likewise are showing incorrect values.

Please see the attached pictures , showing graphs with 14all.cgi and with routers2.cgi
14ALL.CGI showing Correct Values.
14allcgi-example-showing-correct-value.PNG

But routers2.cgi showing Incorrect Values.
routers2-example-showing-wrong-value.PNG


Sample Mikrotik cfg file for plotting active users.

# Mikrotik PPP ACTIVE Users
Target[mtpppusers]: 1.3.6.1.4.1.9.9.150.1.1.1.0&1.3.6.1.4.1.9.9.150.1.1.1.0:gl@10.10.0.1
Title[mtpppusers]: MIKROTIK Active PPP Users on MT/PPP Server
PageTop[mtpppusers]: <H1> MIKROTIK Active PPP Users on MT/PPP Server</H1>
MaxBytes[mtpppusers]: 300
Colours[mtpppusers]: B#8888ff,B#8888ff,B#5398ff,B#5398ff
Options[mtpppusers]: gauge,nopercent,noo,integer,growright
LegendI[mtpppusers]: Active PPP Users on MT
LegendO[mtpppusers]:
YLegend[mtpppusers]: Active PPP Users on MT
Legend1[mtpppusers]: Active PPP Users on MT
Legend2[mtpppusers]:

Regard's
SYED JAHANZAIB

_________________
Regard's

[b]Syed Jahanzaib[/b]
http://aacable.wordpress.com

_________________
Steve Shipway
UNIX Systems, ITSS, University of Auckland, NZ
Woe unto them that rise up early in the morning... -- Isaiah 5:11

_________________
Regard's

[b]Syed Jahanzaib[/b]
http://aacable.wordpress.com

Remember that your browser will cache the graph image until its next update; daily graphs for 5min, weekly for 30min, and so on. Aftermaking the changes oyu need to not only flush your browser's cache, but also clean out the graph directory on the webserver (as routers2 does some caching as well)

When you have done this, and waited 10min, check the daily graph again. The confgi looks right now so it should work as expected; if not, post the latest image up here again. The Maximum line should now show (300 users) rather than (2.4 kbps) and the legend should give values as '20 users' rather than '160 bps'.

_________________
Steve Shipway
UNIX Systems, ITSS, University of Auckland, NZ
Woe unto them that rise up early in the morning... -- Isaiah 5:11