| Cheshire Cat Computing http://www.steveshipway.org/forum/ |
|
| Host template for Cisco http://www.steveshipway.org/forum/viewtopic.php?f=34&t=1612 |
Page 1 of 3 |
| Author: | stevesh [ Wed Aug 20, 2008 12:39 pm ] |
| Post subject: | Host template for Cisco |
| Author: | stevesh [ Mon Aug 25, 2008 11:01 am ] |
| Post subject: | Re: Host template for Cisco |
(I've edited your posts to highlight the code only) These are really cood - much more comprehensive than mine, which ony does CPU. It's worth noting, though, that these load the Cisco MIB from the standard Linux location in order to get symbolic names, so if you are not using Linux with the Cisco MIB installed they will need modification. The first one, although limited, uses numeric OIDs to avoid this problem. |
|
| Author: | stevesh [ Mon Aug 25, 2008 11:53 am ] |
| Post subject: | Re: Host template for Cisco |
This is Tobi's host template for Cisco. It adds Memory and CPU graphs, but does not have any Routers2-specific directives. |
|
| Author: | lltsawant [ Wed Dec 03, 2008 12:29 am ] |
| Post subject: | Re: Host template for Cisco |
Dear sir , Thank for the reply I am not from software background , So i dont know the coding part Kindly let me know in which file this code has to be added , The routers2 application has installed in windows machine , c:\mrtg Regards Lalit |
|
| Author: | stevesh [ Wed Dec 03, 2008 10:07 am ] |
| Post subject: | Re: Host template for Cisco |
These files are host templates for cfgmaker, which means that you need to save them into a file (eg, cisco.htp) and then reference them when you call cfgmaker by using the cfgmaker option --host-template=cisco.htp How and where you call cfgmaker depends on your installation, and if you are using the MRTG Bundle install it may not be possible to fully automate this. |
|
| Author: | Mayurshah [ Tue Oct 20, 2009 6:36 pm ] |
| Post subject: | Re: Host template for Cisco |
Dear Sir , I am suing followin script wrote by you , but it is working on,y for Cisco 2950 switch. it is not woring for Cisco 2811 router , cisco 1841 router. I am unable to write cfgmaker for the same you are requested to please provide the cfgmaker file for cisco Router [ 2811 , 1841 , 1721 Etc ] Thanx in advance Mayur Shah ====================================================================== your script # cisco.htp # This host template is for Cisco devices # cfgmaker --host-template=cisco.htp # Cisco CPU OID is 1.3.6.1.4.1.9.2.1.58.0 if( $sysdescr =~ /cisco/i ) { $head_lines .= "#---------------------------------------------------------------------\n"; my $target_name = $router_name . ".cpu"; $target_lines .= <<ECHO; routers.cgi*Icon: cisco-sm.gif routers.cgi*Description: $sysname routers.cgi*ShortDesc: $router_name #------------------------------------------------- Target[$target_name]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:$router_connect Title[$target_name]: $router_name CPU load YLegend[$target_name]: Percentage ShortLegend[$target_name]: % Legend1[$target_name]: CPU load in % Legend3[$target_name]: Max Observed CPU load LegendI[$target_name]: CPU Load: MaxBytes[$target_name]: 100 UnScaled[$target_name]: dwmy Options[$target_name]: growright, gauge, nopercent, noo PageTop[$target_name]: <h1>$router_name CPU load</h1> <div><table><tr> <td>System:</td> <td>$router_name in $html_syslocation</td> </tr><tr> <td>Maintainer:</td> <td>$html_syscontact</td> </tr><tr> <td>Description:</td> <td>$html_sysdescr</td> </tr><tr> <td>Resource:</td><td>CPU.</td> </tr></table></div> routers.cgi*Icon[$target_name]: chip-sm.gif routers.cgi*InOut[$target_name]: no routers.cgi*InSummary[$target_name]: yes routers.cgi*ShortDesc[$target_name]: CPU routers.cgi*InCompact[$target_name]: yes routers.cgi*Mode[$target_name]: cpu routers.cgi*Options[$target_name]: nototal fixunit ECHO } |
|
| Author: | Mayurshah [ Tue Oct 27, 2009 7:58 pm ] |
| Post subject: | Re: Host template for Cisco |
Dear Sir, I want to use rrdtools for host CPU monitoring , it is working well for monitoring interfaces of Cisco Routers and cisco switches , when i am using rrdtools for monitoring Host CPU followin error is appearing on screen ================================================================== Error reading RRD database c:\mrtg/wwwroot\cpu1.rrd opening 'c:\mrtg/wwwroot\cpu1.rrd': No such file or directory You can visit the configuration verification page here. File: [localhost.cfg] localhost Target: CPU1 Target list: localhost.memoryUsed, storageUsed-C, CPU1 ================================================================== please help me in this regard Thank you in advance Mayur shah India |
|
| Page 1 of 3 | All times are UTC + 12 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|