Board index

Cheshire Cat Software

Steve Shipway's Discussion Groups		 Locations of visitors to this page
It is currently Wed 08 Sep, 2010 11:49 pm

View unanswered posts | View active topics


Board index » Software Support » cfgmaker : Templates and Filters

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 1 post ] 
  Print view Previous topic | Next topic 
Author Message
dmcdonald
 Post subject: Host Template for Various Temperature Probes
PostPosted: Thu 21 Aug, 2008 6:43 am 
Offline
Silver User

Joined: Fri 03 Oct, 2003 11:47 am
Posts: 28
Location: Austin, TX
This works for a number of probes made by uptime devices and it watchdogs
Code:
$head_lines .= <<ECHO
#.....................................................................
ECHO
;

my ($target_name, $tid, $hid);
my ($hostoid) = snmpget($router_connect,'sysObjectID');
if ($hostoid eq "1.3.6.1.4.1.3854.1.2.2.1.1") {
        snmpMIB_to_OID("/usr/share/snmp/mibs/sa.mib");
        my (@temp) = snmpwalk($router_connect,'hhmsSensorArrayTempOnline');
        foreach my $tempi (@temp) {
                if ($tempi =~ /(\d):1/) {
                        $tid = $1;
                        $target_name=$router_name.".temp.".$tid;
$target_lines .= <<TEMP
Target[$target_name]: hhmsSensorArrayTempDegree.$tid&hhmsSensorArrayTempDegree.$tid:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: temp
bb*yellow[$target_name]: 83
bb*red[$target_name]: 88
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 185
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe temperature gauge
YLegend[$target_name]: degrees F
ShortLegend[$target_name]: F
PageTop[$target_name]: <H1>Temperature</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
TEMP
;
      }
   }
   my (@hum) = snmpwalk($router_connect,'hhmsSensorArrayHumidityOnline');
   foreach my $humi (@hum) {
      if ($humi =~ /(\d):1/) {
         $hid = $1;
         $target_name=$router_name.".hum.".$hid;
$target_lines .= <<HUMIDITY
Target[$target_name]: hhmsSensorArrayHumidityPercent.$hid&hhmsSensorArrayHumidityPercent.$hid:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: humidity
bb*yellow[$target_name]: 17:80
bb*red[$target_name]: 12:85
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe humidity gauge
YLegend[$target_name]: relative humidity
ShortLegend[$target_name]: %
PageTop[$target_name]: <H1>Humidity</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
HUMIDITY
;
      }
   }
}
elsif ($hostoid eq '1.3.6.1.4.1.13045.1.1') {
   snmpMIB_to_OID("/usr/share/snmp/mibs/sh2.mib");
   my (@sensors) = snmpwalk($router_connect,'SH2SensorType');
   foreach my $sens (@sensors) {
      if ($sens =~ /(\d+):Temp/) {
         my $sid = $1;
         my $target_name = $router_name . ".temp." . $sid;
$target_lines .= <<TEMP2
Target[$target_name]: SH2SensorCurrentValue.$sid&SH2SensorCurrentValue.$sid:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: temp
bb*yellow[$target_name]: 83
bb*red[$target_name]: 88
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 185
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe temperature gauge
YLegend[$target_name]: degrees F
ShortLegend[$target_name]: F
PageTop[$target_name]: <H1>Temperature</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
TEMP2
;
      }
      elsif ($sens =~ /(\d+):Hum/) {
         my $sid = $1;
         my $target_name = $router_name . ".hum." . $sid;
$target_lines .= <<HUMIDITY2
Target[$target_name]: SH2SensorCurrentValue.$sid&SH2SensorCurrentValue.$sid:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: humidity
bb*yellow[$target_name]: 17:80
bb*red[$target_name]: 12:85
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe humidity gauge
YLegend[$target_name]: relative humidity
ShortLegend[$target_name]: %
PageTop[$target_name]: <H1>Humidity</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
HUMIDITY2
;
      }
   };
}   
elsif (($hostoid eq '1.3.6.1.4.1.901.1')  or ($hostoid eq '1.3.6.1.4.1.17373')) {
# IT Watchdog probe

   snmpMIB_to_OID("/usr/share/snmp/mibs/itw_mib.mib");
# Check if WaLK hack is required
my $oldwarn = $SNMP_Session::suppress_warnings;
$SNMP_Session::suppress_warnings = 1;
my ($testtemp) = snmpget($router_connect,'climateTempC.1');
my $wdi = '.1';
my $wdp = '';
if ($SNMP_Session::errmsg =~ /noSuchName/i) {
   $wdi = '';
   $wdp = 'WaLK';
}
$SNMP_Session::suppress_warnings = $oldwarn;
my $target_name = $router_name . ".temp";
$target_lines .= <<TEMP3
Target[$target_name]: ${wdp}climateTempC${wdi}&${wdp}climateTempC${wdi}:$router_connect * 9 / 5 + 32
bb*host[$target_name]: $router_name
bb*svc[$target_name]: temp
bb*yellow[$target_name]: 83
bb*red[$target_name]: 88
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 185
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe temperature gauge
YLegend[$target_name]: degrees F
ShortLegend[$target_name]: F
PageTop[$target_name]: <H1>Temperature</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
TEMP3
;
$target_name = $router_name . ".hum";
$target_lines .= <<HUMIDITY3
Target[$target_name]: ${wdp}climateHumidity${wdi}&${wdp}climateHumidity${wdi}:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: humidity
bb*yellow[$target_name]: 17:80
bb*red[$target_name]: 12:85
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe humidity gauge
YLegend[$target_name]: relative humidity
ShortLegend[$target_name]: %
PageTop[$target_name]: <H1>Humidity</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
HUMIDITY3
;
$target_name = $router_name . ".air";
$target_lines .= <<AIRFLOW3
Target[$target_name]: ${wdp}climateAirflow${wdi}&${wdp}climateAirflow${wdi}:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: airflow
bb*yellow[$target_name]: 1:99
bb*red[$target_name]: 0:100
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe airflow gauge
PageTop[$target_name]: <H1>Airflow</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
AIRFLOW3
;
$target_name = $router_name . ".light";
$target_lines .= <<LIGHT3
Target[$target_name]: ${wdp}climateLight${wdi}&${wdp}climateLight${wdi}:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: light
bb*yellow[$target_name]: 1:99
bb*red[$target_name]: 0:100
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe Light gauge
PageTop[$target_name]: <H1>Light</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
LIGHT3
;
$target_name = $router_name . ".sound";
$target_lines .= <<SOUND3
Target[$target_name]: ${wdp}climateSound${wdi}&${wdp}climateSound${wdi}:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: sound
bb*yellow[$target_name]: 1:99
bb*red[$target_name]: 0:100
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe sound gauge
PageTop[$target_name]: <H1>Sound</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
SOUND3
;
# check for a water probe
$target_name = $router_name . ".water";
my ($io3val) = snmpget($router_connect,'climateIO3.1');
if ($io3val > 0) {
$target_lines .= <<WATER
Target[$target_name]: climateIO3.1&climateIO3.1:$router_connect
bb*host[$target_name]: $router_name
bb*svc[$target_name]: water
bb*yellow[$target_name]: 50:101
bb*red[$target_name]: 40:102
routers.cgi*InSummary[$target_name]: yes
routers.cgi*Options[$target_name]: nototal
Directory[$target_name]: $directory_name
MaxBytes[$target_name]: 100
RouterUptime[$target_name]: $router_connect
Options[$target_name]: Gauge noi
Title[$target_name]: Probe water gauge
PageTop[$target_name]: <H1>Water</H1>
<TABLE>
   <TR><TD>System:</TD><TD>$sysname  </TD></TR>
   <TR><TD>Location:</TD><TD>$syslocation </TD></TR>
</TABLE>
WATER
;
};

}
else { print "The OID is $hostoid\n"; }

_________________
Daniel J McDonald, CCIE #2495, CISSP # 78281, CNX
Austin Energy

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 1 post ] 

Board index » Software Support » cfgmaker : Templates and Filters

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group